REDLINE HIGHPERFORMANCE 0W30 ENGINE OIL - 3.8L/CS4
€73.24
VAT excluded
Ref: REDL11115
EAN: 83522111157
Prod. in stock: 13
Delivery 24/48 h
Formulated to reduce low speed pre-ignition (LSPI)
For use where 5W30 is recommended, especially in colder environments.
Better flow at extremely cold temperatures compared to 5W30 and 10W30
Produced in a single top-of-the-line grade, these products offer the highest quality available on the market today and in the widest variety of viscosities.
Fully synthetic ester/PAO formula for passenger cars, light trucks, high performance vehicles and marine applications.
Designed to provide the greatest protection, efficiency, cleanliness and superior drain intervals.
Excellent wear protection and friction reduction over a wide range of operating conditions
High detergency allows for extended drain intervals and provides greater cleanliness.
Improved fuel economy and ring seal for more power.
Superior high temperature stability and oxidation resistance improve hot metal lubrication compared to other synthetic materials.
High natural viscosity index (VI) provides a thicker oil film on bearings and cams.
Less evaporation than other synthetics to improve efficiency and ring seal.
Blended with polyol ester/PAO base oils that present natural multigrade properties, avoiding unnecessary additives that hinder lubricity.
All products are fully compatible with conventional and synthetic motor oils.
SAE Viscosity Grade (Engine Oil) 0W30
Vis @ 100°C, CSt 10.8
Vis @ 40°C, CSt 60
Viscosity index 172
CCS viscosity, equilibrium, @ °C 58@-35
Pour point, °C -60
Pour Point, °F -76
NOACK Evaporation Loss, 1 hour at 482°F (250°C), % 6
HTHS Vis, CP at 150°C, ASTM D4741 3.3
For use where 5W30 is recommended, especially in colder environments.
Better flow at extremely cold temperatures compared to 5W30 and 10W30
Produced in a single top-of-the-line grade, these products offer the highest quality available on the market today and in the widest variety of viscosities.
Fully synthetic ester/PAO formula for passenger cars, light trucks, high performance vehicles and marine applications.
Designed to provide the greatest protection, efficiency, cleanliness and superior drain intervals.
Excellent wear protection and friction reduction over a wide range of operating conditions
High detergency allows for extended drain intervals and provides greater cleanliness.
Improved fuel economy and ring seal for more power.
Superior high temperature stability and oxidation resistance improve hot metal lubrication compared to other synthetic materials.
High natural viscosity index (VI) provides a thicker oil film on bearings and cams.
Less evaporation than other synthetics to improve efficiency and ring seal.
Blended with polyol ester/PAO base oils that present natural multigrade properties, avoiding unnecessary additives that hinder lubricity.
All products are fully compatible with conventional and synthetic motor oils.
SAE Viscosity Grade (Engine Oil) 0W30
Vis @ 100°C, CSt 10.8
Vis @ 40°C, CSt 60
Viscosity index 172
CCS viscosity, equilibrium, @ °C 58@-35
Pour point, °C -60
Pour Point, °F -76
NOACK Evaporation Loss, 1 hour at 482°F (250°C), % 6
HTHS Vis, CP at 150°C, ASTM D4741 3.3
Documentation
