FRAME DEFENDER PAINT PROTECTION FILM SET 31 PIECES

The Frame Defender Paint Protection Film Set is a quick and easy way to protect your paint from stone chips, scratches, wear and tear and loss of value, helping to maintain the value of your bike. The 31-piece universal set of heavy-duty polyurethane material is easy to apply and easy to remove. Universal-Set of 31 pieces, cut out, ready to use, available in transparent or matt glass EXTREMELY ROBUST :High-strength polyurethane material is resistant to cold, heat, humidity, ice, salt and UV radiation. Even high-pressure cleaners are no problem for the tough protective film. WORKS AS A PAINT PROTECTION FILM :Protects the frame against stone chips, scratches, wear and tear and maintains the value of the bike. EASY MOUNTING : The self-adhesive film can be easily and bubble-freely mounted using a wet application method. EASY TO REMOVE: Even after years of use, the paint protection film leaves no residue during removal and thus protects the paint. Tip: We recommend leaving the film on the paint for a maximum of two years. So it should be replaced! Application Clean the surface on which the film is to be applied thoroughly from grease and dust residues. For cleaning use silicone remover, isopropyl alcohol or rubbing alcohol (no alcohol or benzene). Dry the surface with a lint-free cotton cloth. Remove the backing paper. Generously spray the surface and sticky side of the film with a mixture of water and a few drops of dish soap. Lay the piece of film on the surface and lay it down. Spray the surface of the film again, press it down and stick it out from the center with a squeegee or lint-free cotton cloth. Use a cotton cloth to remove or aspirate the extracted liquid.